Connecting to a DVD Player

Connecting with HDMI (Best)

Connecting with

1.Make sure the power of the TV and your DVD player is turned off.

2.Connect a HDMI cable to the HDMI port of your DVD player and the other end to the HDMI port off the back of your TV.

3.Turn on the TV and your DVD player.

4.Use the remote control’s source button or the source button on the TV to switch to HDMI.

Please Note :

Refer to the DVD player’s manual to make sure the DVD player is configured to output correctly to the TV.

Please Note :

1.Refer to the DVD player’s manual to make sure the DVD player is configured to output correctly to the TV.

2.This TV does not decode Bit stream digital audio, so make sure the DVD is setup for PCM digital audio through HDMI.

3.If HDMI 1 is occupied, use HDMI 2 as your connection port.

1.Make sure the power of TV and your DVD player is turned off.

2.With a Component Cable, connect the green connector to the DVD player and Component 1’s green connector port on the TV.

3.Connect the blue color connector to your DVD player and Component 1’s blue connector port on the TV.

4.Connect the red color connector to both your DVD player and Component 1’s red connector port on the TV.

5.With an RCA Audio Cable, connect the white color connector to both your DVD player and Component 1’s white connector port on the TV.

6.Connect the red color connector to both your DVD player and Component 1’s red connector port on the TV.

7.Turn on the TV and your DVD player.

8.Use the remote control’s source button or the source button on the TV to switch to YPbPr.

Please Note :

1.If Component 1 is already occupied, please use Component 2 as your connection port and switch to source YPbPr2.

2.Refer to the DVD player’s manual to make sure the DVD player is configured to output correctly to the TV.

4.This TV will turn off automatically if there’s no signal present for more than 15 minutes.

Page 12