Sunfire TGP-5(E) Speaker Position Menu, Main Menu, Settings, Speakers, L-Rcrossover, Subwfr Mode

CHAPTER 4

Speaker Position Menu

	MAIN MENU
TRIMS
MODES
TONE
INPUTS			SETTINGS
SETTINGS
		MAIN ZONE
		ZONE 2			SPEAKERS
		SPEAKERS
		VIDEO
				SIZE
		SOFTWARE
				POSITION
		CONTROL
				CALIBRATION
				L-R CROSSOVER		110 HZ
				C-SURR CROSSOVER		90 H
Speaker Position				SUBWFR MODE

This menu allows you to enter the distance from your listening position to the various speakers. The TGP-5 will then automatically adjust and correct the speaker delay times. The sound from each speaker should arrive at the listener at the correct time. The distance measurement is not criti- cal, and a visual estimate is usually adequate.

The procedure is as follows:
1. Measure or visually estimate
(in feet and inches) how far
each speaker is away from the
center listening position of your
home theater.
2. In the OSD menu, use the
remote control joystick arrow
buttons to enter the distance
in feet and inches for each
	SPEAKER	DISTANCE
speaker.
3. The TGP-5 automatically sets	LEFT MAIN/SIDE
	RIGHT MAIN/SIDE
the appropriate delays for each
speaker so the sounds arrive	CENTER
at the listening position at the	LEFT SURROUND
correct time.
	RIGHT SURROUND
4. Use this table to record your	LEFT SURR BACK
speaker distance measure-
	RIGHT SURR BACK
ments.

	SPEAKER DISTANCE
L MN/SIDE		4	ft 6in
R MN/SIDE		4	ft 6in
CENTER		3	ft 0in
L SUR		4	ft 0in
R SUR		4	ft 0in
L SUR BACK		5	ft 0in
R SUR BACK		5	ft 0in

39

User's Manual