Speaker Crossover Menu, Surr Crossover | Sunfire TGP-5(E) instruction

CHAPTER 4

Speaker Crossover Menu

MAIN MENU

TRIMS

MODES

TONE

INPUTS

SETTINGS

MAIN ZONE

ZONE 2

SPEAKERS

VIDEO

SIZE

SOFTWARE

CONTROL

POSITION

CALIBRATION

L-R CROSSOVER

80 HZ

C-SURR CROSSOVER

80 HZ

SUBWFR MODE ENHANCED BASS

	Crossover adjustment
Subwoofer Mode	The TGP-5 bass management	Most manufacturers provide a -3 dB
Subwoofer Mode	The TGP-5 bass management	Most manufacturers provide a -3 dB
The subwoofer output can be set	system allows you to send the low	speciﬁcation for their speakers. This
The subwoofer output can be set	frequencies of your speakers to a	is the frequency where the speaker's
to Normal, or to an Enhanced Bass	frequencies of your speakers to a	is the frequency where the speaker's
to Normal, or to an Enhanced Bass	subwoofer. The crossover point of	output has dropped by 3 dB. Set the
mode.	subwoofer. The crossover point of	output has dropped by 3 dB. Set the
mode.	your main left and right speakers can	TGP-5's crossover to this frequency or
	your main left and right speakers can	TGP-5's crossover to this frequency or
The Enhanced Bass mode provides	be selected from 40 Hz to 160 Hz, as	above. If you cannot ﬁnd this, set the
an output to your subwoofer even	can the crossover point of your center	crossover to 80 Hz (the default).
when you are listening to a stereo	and surround speakers.	Set your subwoofer's own cross-
when you are listening to a stereo
source with main speakers set to	For example, if your main left and
source with main speakers set to		over control to maximum frequency or
LARGE. In the Normal mode, there		over control to maximum frequency or
LARGE. In the Normal mode, there	right speakers are a bit lacking in bass	bypassed mode. If it is set lower than
would be no subwoofer output in this	right speakers are a bit lacking in bass	bypassed mode. If it is set lower than
would be no subwoofer output in this	response, you can set the speaker	the TGP-5, there would be a hole in
case, and the bass would only come	response, you can set the speaker	the TGP-5, there would be a hole in
case, and the bass would only come	size to SMALL, and set the L-R cross-	the mid-bass, and bass information
from the main speakers.	size to SMALL, and set the L-R cross-	the mid-bass, and bass information
from the main speakers.	over to 40 Hz. The subwoofer will then	would be missing.
	over to 40 Hz. The subwoofer will then	would be missing.
The Enhanced Bass mode has no	receive the lower bass range, (not
The Enhanced Bass mode has no	well reproduced by your front speak-
effect if the main speakers are set to	well reproduced by your front speak-
effect if the main speakers are set to	ers). This will not affect the range sent
SMALL, as the subwoofer is automati-	ers). This will not affect the range sent
SMALL, as the subwoofer is automati-	to your center or surrounds.
cally engaged. It also has no effect in	to your center or surrounds.
5.1 or greater surround modes.	A setting of 80 Hz is a good start-
5.1 or greater surround modes.	A setting of 80 Hz is a good start-
	ing point if you are not sure of the
	response of your speakers. In this
	example:
	• The subwoofer receives frequen-


	cies below 80 Hz, from all speak-
	cies below 80 Hz, from all speak-
	ers whose size is set to SMALL.
	ers whose size is set to SMALL.
	• All speakers set to SMALL, receive
	frequencies above 80 Hz.

User's Manual

Sunfire TGP-5(E) Speaker Crossover Menu, Crossover adjustment Subwoofer Mode, Surr Crossover

Models: TGP-5(E) TGP-5

Speaker Crossover Menu

L-R CROSSOVER

C-SURR CROSSOVER

Crossover adjustment

Subwoofer Mode

TGP-5(E), TGP-5 specifications