Sunfire TGP-5(E) System Configurations, Chapter, Analog audio and composite video, Users Manual

CHAPTER 2

System Configurations

The following pages show some typical connections that you might make in your in- stallation. They show how the inputs and outputs of the TGP-5 are connected to various audio and video components.

Analog audio and composite video

Composite video signal from TGP-5 MAIN composite video output to TV Monitor's composite video input

MANUFACTURED UNDER			LICENSE
FROM DOLBY
"DOLBY",		LABORATORIES.
	"PRO-LOGIC" AND THE
DOUBLE-D SYMBOL ARE
TRADEMARKS OF DOLBY
LABORATORIES.

DVD IN							SAT IN
MANUFACTURED UNDER LICENSE
							FROM DIGITAL
SYSTEMS, INC. US PAT. NO.										THEATER
5,978,762 AND OTHER					5,451,942,			5,956,674,
PENDING. "DTS",				WORLD-WIDE					5,974,380,
"NEO:6" ARE		"DTS-ES EXTENDEDPATENTSS							ISSUED AND
	TRADEMARKS OF							URROUND" AND
SYSTEMS, INC. COPYRIGHT						DIGITAL THEATER
SYSTEMS, INC. ALL					1996, 2000, DIGITAL				THEATER
			RIGHTS RESERVED.

HDMI OUT

Composite video signal
From: DVD Player video output	Analog audio signals
To: TGP-5 DVD video input
	From: DVD Player audio outputs
	To: TGP-5 DVD L/R audio inputs

User's Manual

When the DVD input is selected from the front panel or the remote control, the DVD’s audio will play in your system and the video is sent to the TV.

As with all the video connections that follow, you must make sure that your TV monitor is set to look at its correct video input or you will not see the picture.

If your TV and other video compo- nents have S-Video connections, use them, as they provide better picture quality than composite video.

15