INSTALLATION
INSTRUCTIONS
ELECTRICAL WIRING - INDOOR UNIT
*Only an electrician must do the connection of this unit.
Note: The power of indoor unit is supplied by the outdoor unit.The outside disconnect switch must be installed between electrical panel and condensing unit.
Operation procedures:
1.Open the surface panel.
2.Open the cover and cover plate of electric box. (Right figure).
3.Remove the receiving window as shown in the below left figure.
Support
Cover of
electric box Cover plate of electric box
Connector
Wire pipe
Receiving window | Cover of |
|
| wiring hole | Fixed nut |
4.Wire pipe should be tightened by the fixed nut and the electric box should be fixed as shown in the above right figure and the below figure.
Wiring cover
Power connection cord
16
