REMOTE CONTROL OPERATION 
MPORTANT:
Some functions on this remote control are not available on models sold in Canada. The usage and operation of these functions are therefore not detailed in this manual.
NOTE:
•Make sure that there is no obstruction between the remote and the inside unit.
•Do not drop or throw the remote control
•Do not place the remote control near hot places or exposed to sunlight
Two buttons to set the temperature
When unit is running under AUTO, COOL, FAN, HEAT, press this button to select the fan speed. AUTO mode, LOW fan, MED fan, HIGH fan. In DEHUMIDIFYING mode the fan speed is set to LOW and cannot be changed.
AUTO FAN |
Under COOL,DRY,HEAT mode, press the button once to start the SLEEP fonction. Press the button once again, to stop the function (Available on some models only)
Press this button to select the operation mode desired.
AUTO,COOLING,DEHUMI- DIFYING, FAN, HEAT
COOL mode |
DRY mode |
FAN mode |
HEAT mode |
Press clock button once. Clock icon then is flashing. You have approx.
7 seconds to set the clock. With clock icon still flashing, press the TIME- button to decrease the time and the TIME+ button to increase. To confirm the hour set, press the CLOCK button.
Mode and temperature appearing on your remote control will also show in the round LCD display on the unit (right side of the front panel).
5
