SRC-1600 User’s Manual

Loading preset codes using auto search

You can quickly start using your SRC-1600 by using the auto search to load preset codes.

1.Switch on the device for which you want to set up the SRC-1600.

2.Select the appropriate device on the SRC- 1600 using the device buttons. See Selecting devices and pages on page 7.

3.Press and hold for two seconds to enter setup on the touch screen.

4.Press .

5.Point the IR transmitter of the SRC-1600 at the device then press .

6.The SRC-1600 will try to turn off the device by transmitting different preset IR codes. When the device switches off, immediately press any hard button or touch the screen.

7.Ensure that you have the correct code by pressing Volume +/-, Channel +/- or to test. If the code is not correct, press " " or " " and test the code again.

8.Press the button to save and exit.

8

Page 12
Image 12
Sunwave Tech SRC-1600 manual Loading preset codes using auto search