Creating Macros
Creating Macros
A macro is a sequence of commands. The Macro feature enables you to send a sequence of up to 60 commands by pressing a single button. The macro can also include delays.
NOTE: Assigning a macro to any button overwrites any previous function.
1.Select the appropriate device by pressing the device button.
2.Press and hold 
to enter setup.
3.Press 
.
4.Press the button to which you want to assign the macro. A double beep sounds to indicate macro mode.
5.Press the buttons in the sequence of your commends for a Macro.
If necessary, to insert a delay
by press 
. 
flashes in the 
button. Press the desired
delay (in seconds) on the number buttons. For example, for a three second delay press 3.
6.When you have completed the macro, press 
.
19
