Appendix C: Software Installation
Rebuilding Arrays
Notes:
Rebuilding applies to Fault Tolerant arrays (RAID 1) only.
If an array Build process (or initialization) is interrupted or critical with one member missing, you must perform a Rebuild to optimized its functionality. For a critical array Rebuild operation, the optimal drive is the source drive.
If no spare array exists and a hard disk drive fails, you need to create a spare before you can rebuild an array.
To rebuild an array:
1.From the Main Menu, select Manage Arrays (as shown in the screen below). From the list of arrays, select the array you want to rebuild.
2.Press Ctrl+R to rebuild.
