7-4
SUPERSERVER 6014L-T User's Manual
Execute Disable Bit (Available when supported by the OS and the CPU.)
Set to Enabled to enable the Execute Disable Bit to allow the processor to
classify areas in the system memory where an application code can and cannot
execute, thus preventing a worm or a virus from creating a fl ood of codes to
overwhelm the processor or damage the system during an attack. (For more
information regarding hardware/software support for this function, please refer
to Intel's and Microsoft's web sites.
Core Multi-Processing (Available when supported by the CPU.)
Select Enabled to enable the function of multiple CPU core processing. if Dis-
abled, one CPU execution core will be disabled.
CPU TM Function (Available when supported by the CPU.)
This feature allows the user to activate the CPU thermal monitor mechanism. TM1
allows the CPU to regulate its power consumption based upon the modulation
of the CPU Internal clock when the CPU temperature reaches a pre-defi ned
overheat threshold. The options are Disabled and Enabled. (Select Enabled to
allow the CPU to reduce its power consumption by lowering the CPU frequency
and the CPU voltage when the CPU temperature reaches a pre-defi ned overheat
threshold.) TM2 is available only when it is supported by the CPU.
IDE Confi guration Sub-Menu
IDE Confi guration
This feature allows the user to confi gure the IDE mode. The options are Disabled,
P-ATA (Parallel ATA) only, S-ATA (Serial ATA) only and P-ATA & S-ATA.
Combined Mode Operation
This feature allows the user to select the IDE Combined Mode. The options are
P-ATA 1st Channel and S-ATA 1st Channel.
S-ATA Ports Defi nition
This feature allows the user to confi gure the Serial ATA Ports. The options are
P0-Master/P1-Slave and P0-Slave/P1-Master.
Primary IDE Channel Master/Slave, Secondary IDE Channel Master/
Slave, Third IDE Master/Slave, Fourth IDE Channel Master/Slave
These settings allow the user to set the parameters of Primary IDE Channel Master/
Slave, Secondary IDE Channel Master/Slave, Third IDE Master/Slave, Fourth IDE
Channel Master/Slave slots. Hit <Enter> to activate the following sub-menu screen
for detailed options of these items. Set the correct confi gurations accordingly.