SUPER MICRO Computer 6015B-T user manual Onboard Indicators, SAS Controller Enable 6015B-3 only

Chapter 5: Advanced Serverboard Setup

SAS Controller Enable (6015B-3 only)

JPS1 enables or disables the Adapt- ec 9140W SAS controller on the serverboard. See the table on the right for jumper settings. The default setting is enabled.

Compact Flash Master/

Slave

The JCF1 jumper allows you to as- sign either master or slave status to a compact fl ash card populating the JIDE#2 slot. See the table on the right for jumper settings.

SAS Controller Enable Jumper Settings (JPS1)

Jumper Setting	Defi nition
Pins 1-2	Enabled
Pins 2-3	Disabled

Compact Flash

Master/Slave

Jumper Settings (JCF1)

Jumper Setting	Defi nition
Closed	Master
Open	Slave

SMB to PCI Slots

Jumpers JI2C1 and JI2C2 allow you to connect the PCI-X/PCI-E slots to the System Management Bus. The default setting is disabled. See the table on the right for jumper settings.

SMBus to PCI

Jumper Settings (JI2C1, JI2C2)

Jumper Setting	Defi nition
Pins 1-2	Enabled
Open	Disabled

5-10 Onboard Indicators

JLAN1/JLAN2 LEDs

The Ethernet ports (located beside the VGA port) have two LEDs. On each port, one LED indicates activity while the other LED may be green, amber or off to indicate the speed of the connection. See the table on the right for the functions associated with the connection speed LED.

JLAN LED

(Connection Speed Indicator)

LED Color	Defi nition
Off	10 MHz
Green	100 MHz
Amber	1 GHz

5-21