5-2

SUPERSERVER 6015B-3/6015B-T User's Manual
IMPORTANT! Always connect the power cord last and remove it fi rst before add-
ing, removing or changing any hardware components. Make sure that you install
the processor into the C PU socket before you install the heatsink and fan. The
X7DBR-3/X7DBR-E can support either o ne or two Xeon 5100/5000 type pro ces-
sors. If installing one processor only, install it into CPU socket #1.
Notes:
1. Intel's boxed Xeon CPU package contains a CPU fan and heatsink assembly. If
you buy a CPU separately, make sure that you use only Intel-certifi ed multi-direc-
tional heatsinks and fans.
2. When purchasing a Xeon 5100/5000 CPU or when receiving a serverboard with
a CPU pre-installed, make sure that the CPU plastic cap is in place and none of
the CPU pins are bent; otherwise, contact the retailer immediately.
!
5-2 Processor and Heatsink Installation
When handling the proces sor, avoid placing direct pressure on the label
area of the fan. Also, do not place t he serverboard on a cond uctive
surface, which c an damage the BIOS batter y and prevent the system
from booting up.

Installing the Processor

1. A black PnP cap is attached to the
load plate to protect the CPU socket.
Press the load lever down and away
from the retention clasp to release the
load plate from its locked position.
Load lever
2. Gently lift the load lever to open the
load plate.
PnP cap
Load plate released