SUPER MICRO Computer 6015B-3 Adding/Deleting Hotspares To add a Hotspare, To delete a Hotspare

SUPERSERVER 6015B-3/6015B-T User's Manual

Adding/Deleting Hotspares

To add a Hotspare:

Note: In order to rebuild a RAID (RAID 0 or RAID 1), you will need to add a new HDD as a hotspare.

1.From the main menu (shown on Page D-4), select Add/Delete Hotspares.

2.Use the up and down arrow keys to highlight and select the disk you want to designate as a hotspare, and press <Insert>, and then, press <Enter>.

3.Press Yes when the following prompt is displayed:

"Do you want to create spare?" (Yes/No?)

The spare you have selected will appear in the Selected drives Menu.

To delete a Hotspare:

1.From the main menu (shown on Page D-4), select Add/Delete Hotspares.

2.Use the up and down arrow keys to highlight and select the Hotspare you want to delete, and press <delete>, and then, press <Enter>.

3.When the following warning is displayed: "Do you want to delete the hot spare?" (Yes/No?), press Yes to delete the hotspare you have selected.

D-12