AOC-USAS-L8i Add-on Card User’s Manual
5-4
6. Select one of the Setup options. The options are fully explained in the screen text.
Select COMPLETE if you are installing MegaRAID Storage Manager software on
a server.
Select CLIENT if you are installing MegaRAID Storage Manager software on a
PC that is used to view and configure servers over a network.
Select SERVER to install only those components required for remote server man-
agement.
Select STANDALONE if you are using MegaRAID Storage Manager software to
create and manage storage configurations on a standalone workstation.
Click NEXT to proceed.
7. On the next screen, click INSTALL to install the program.
8. Click FINISH when the final CONFIGURATION WIZARD screen appears.
If you select CLIENT installation for a PC used to monitor servers, and if there are no
available servers with a registered framework on the local subnet (that is, servers with a
complete installation of MegaRAID Storage Manager software), you cannot connect to a
remote server unless you first edit the startupui.bat file. Specifically, you must add the IP
address of the remote server to the end of the startupui.bat file.
Figure 5-2. Setup Type Screen