AOC-USAS-L8i Add-on Card User’s Manual
6-14
3. Click NEXT.
The DEFINING A VIRTUAL DISK screen of the Configuration Wizard appears, as shown
in Figure6-9.
The ARRAYS menu lists the new array that you just defined, plus any existing arrays
with holes (free space) that could be used for a new configuration.
4. From the ARRAYS menu, select the array to use for the new virtual disk.
5. In the right VIRTUAL DISK PROPERTIES panel, select RAID 0 as the RAID level.
6. (Optional) Set Size (in MB) to a lower number if you do not want to use the entire
available capacity for the new virtual disk.
7. (Optional) Change the other properties in the VIRTUAL DISK PROPERTIES panel, if
necessary.
8. Click ACCEPT to accept the configuration of the new virtual disk.
Figure 6-9. Defining a Virtual Disk Screen