SUPER MICRO Computer SC512 user manual Expansion Slot Setup, Installing Expansion Cards

SC512 Chassis Manual

Expansion Slot Setup

SC512 chassis includes a slot for one full height/full length add-on card and a riser card. The riser card allows the expansion card to fit within the small 1U form.

The expansion card slot does not require a screw to hold the card in place.

Add-on Card Slot Latch

Expansion Card

Slot Shield

Figure 5-8: Installing the Expansion Card

Installing Expansion Cards

1.Disconnect the power supply, lay the chassis on a flat surface, and open the chassis cover.

2.Slide the add-on card clip upward.

3.Slide the add-on card slot shield toward the side of the chassis and remove the Shield.

4.Secure the riser card to the motherboard.

5.Slide the add-on card (with "L" bracket) into the add-on card slot and the riser card.

6.Replace the add-on card slot clip to secure the add-on card.

5-8