SC512 Chassis Manual
Flat head
M5 x 12 mm [0.472]
Washer for M5
Secure to the
Rear of the Rack
Attach Outer Racks
together
Secure to the
Front of the Rack
Figure 6-3: Assembling the Outer Rails
Installing the Outer Rails to the Rack
Installing the Outer Rails
1.Attach the short bracket to the outside of the long bracket. You must align the pins with the slides. Also, both bracket ends must face the same direction.
2.Adjust both the short and long brackets to the proper distance so that the rail fits snugly into the rack.
3.Secure the long bracket to the front side of the outer rail with two M5 screws and the short bracket to the rear side of the outer rail with three M5 screws. Use a washer with each screw.
4.Repeat steps
