SUPER MICRO Computer SC512 Mid-Mount Telco Rack, Instaling into a Mid-Mount Position Rack

Chapter 6: Rack Installation

Mid-Mount Telco Rack

The SC512.supports Telco rack installation. The SC512 chassis compact design allows the chassis to be installed into a Telco rack without the use of rails.

Place chassis

ears here

Flat head

M4 x 4 mm

[0.157]

Figure 6-6: Moving the Chassis Ears for Telco Rack Installation

Installing the Chassis into a Rack in Mid-Mount Position

Instaling into a Mid-Mount Position Rack

1.If it is necessary to install the chassis in a mid-mount Telco rack, remove the chassis rails and the chassis ears (if the ears are installed at the front of the chassis).

2.Locate the three screw holes in the middle of the chassis and secure the ears to the chassis with three flat head screws. Make sure the screws are secure, but do not over tighten the screws.

6-9