SC512 Chassis Manual
Remove these screws
| Power Supply |
Pan Head |
|
| |
[0.197] | Remove this screw |
|
Figure 5-12: Removing the Power Supply
Replacing the Power Supply
1.Disconnect the power cord from the from the chassis to ensure that the unit is not accidentally plugged in.
2.Place the chassis on a stable hard surface and remove the chassis cover.
3.Disconnect the power supply from the motherboard and other chassis compo- nents.
4.Remove the screws securing the power supply. Two screws are in the back of the chassis and one underneath. Retain the screws and the internal brace that connects the power supply to the chassis from underneath.
5.Pull the power supply out of the chassis.
6.Place the new power supply into the chassis and secure the power supply using the three screws and internal brace.
7.Connect the power supply to the motherboard and other chassis components.
8.Connect the power cord to the power supply and power up the chassis/server.
9.Once you confirm that the power supply has been installed correctly, replace the chassis cover.
