SUPER MICRO Computer SC823T Stop

SC823 Chassis User’s Guide

Stop This product shall only be accessed, assembled and serviced

by technically qualified personnel or technicians.

To avoid personal injury and property damage, please read all the information

provided in Chapter 1, and carefully follow all the Safety Guidelines listed before

accessing or servicing the SC823 or its components. For your convenience, some

Safety Steps are also listed below.

Before accessing the chassis:

1. Turn off all peripheral devices and turn off the power supply connected to the

SC823.

2. Unplug all power cords from the system or the wall outlets.

3. Disconnect all the cables and label the cables for easy identification.

4. Use a grounded wrist strap designed to prevent static discharge when han-

dling components.

Removing the chassis covers:

After completing the above steps, you can remove the chassis covers and install

components and devices into the chassis as described in this chapter.

1. Press the tabs or the screws to loosen and remove the cover or the components

from the chassis.

2. Save all the screws and fasteners for later use. (If necessary, label these screws

or fasteners for easy identification.)

3. Follow the instructions given in this chapter to remove the chassis covers.

1. Phillips Screw Driver

2. Antistatic Strap