Chapter 2: Chassis Description and Installation Instructions
D2. Accessing the IDE Drive Tray and Installing a Hard Disk (*For the SC823i Series)
To install the IDE drive into the chassis, first, you need to remove the top cover; then, you need to remove the IDE drive tray from the chassis.
Procedures
1. Remove the screws from the top of the IDE drive as shown below.
2. Once the top cover and the screws are removed, press on the back side of the IDE drive tray and push it out from the chassis.
1 
2 
3.Remove the screws to loosen the drive tray. Once loosened, pull it out from its housing. Then, mount a hard drive in the drive tray and secure it with screws as shown below.
3b
3a
3c
3d
D
