![](/images/new-backgrounds/1188804/188804215x1.webp)
5.When the Boot Sector Recovery Process is complete, the system will reboot automatically and you will see a checksum error on your screen.
Part 2: BIOS Reprogramming (Re-Flashing)
After completing the Boot Sector Recovery Process, you will need to reprogram
When completed, the system will reboot automatically, and you will see a checksum error again.
Press “F1” to go to setup. Press “F9” to load the defaults and then press “F10” to save and exit.
C-2 Recovery Process from an IDE/SATA ATAPI Disc Drive
This process is identical to the Boot Sector Recovery Process from a USB Device/ Drive (as above), except that the BIOS image file (“super.rom”) is loaded from an IDE/ATAPI CD/DVD/ROM/RW disc drive that is attached to the system. Note that loading from an IDE/SATA hard disk drive is NOT supported.
1.Using a different system, download and copy the correct BIOS binary image into a writable CD/DVD disc's Root "\" Directory. Rename the downloaded file to
"super.rom", so the recovery process can recognize and read the BIOS binary file.
Note: Record/Burn the
2.Insert the
3.Follow the
If your system still does not boot up after performing the above procedure, then there may be other issues with your motherboard. Please contact your customer service representative.