X8SIA/X8SIA-F
1
2
3
4
5
Installation Instructions
Install the I/O shield into the chassis. Note: Image is for illustration purposes only. Your particular chassis may be different.
I/O Shield 
Locate the mounting holes on the motherboard. Refer to the layout on the previous page for mounting hole locations.
Locate the matching mounting holes on the chassis. Install standoffs in the chassis as needed. Align the mounting holes on the motherboard against the mounting holes on the chassis.
Stand Off
Install the motherboard into the chassis carefully to avoid damage to mother- board components.
Insert a Pan head #6 screw into a mounting hole on the motherboard and its matching mounting hole on the chassis, using a Philips screwdriver.
6
Repeat Step 4 to insert #6 screws into all mounting holes.
7
Make sure that the motherboard is securely placed in the chassis.
