SUPER MICRO Computer USB Wake-Up, BMC Jumper X8SIA-F Only, BP USB 0/1 Wake-up BMC Jumper

X8SIA/X8SIA-F User's Manual

USB Wake-Up

Use the JPUSB1 jumper to "wake-up" your system by pressing a key on a USB keyboard or clicking the USB mouse. The JPUSB1 jumper is used together with the USB Wake- Up feature in the BIOS. Enable this jumper and the USB feature in the BIOS to wake-up your system via USB devices.

Note: When the USB function is set to Enabled in the BIOS, and a USB Wake- up jumper is set to Disabled, remove the USB devices from the USB ports whose USB jumper is Disabled before the sys- tem goes into the standby mode.

BMC Jumper (X8SIA-F Only)

JPB is used to enable or disable the BMC (Baseboard Management Control) Chip and the onboard IPMI connection. This jumper is used together with the IPMI settings in the BIOS. The default position is on pins 1 and 2 to enable BMC. See the table on the right for jumper settings.

JPI2C

JPW1

KB/MOUSE FLOPPY

JPUSB1 (BackPanel USB

0/1/2/3 Wake-up Enable)

Pin# Definition

1-2 Enabled (Default)

2-3 Disabled

BMC IPMI Enable/Disable Jumper

Settings

Settings	Definition
Pins 1-2	Enabled (Default)
Pins 2-3	Disabled

A. BP USB 0/1 Wake-up

B. BMC Jumper

FAN1

USB0/1 USB2/3 JPUSB1

COM1

VGA

LAN1/LAN2

JPL2 JPL1

A

DIMM1B DIMM1A DIMM2C DIMM2B DIMM2A

DDR3 1066/1333 UDIMM/RDIMM required	DIMM1C	FAN2/CPUFAN
FAN2

LE1

JLED

JF1

CPU

IPMI_LAN

JF1

FAN5 SLOT7 PCI-E 2.0 (2.5GT/s) X1

JPB:BMC

B

Hermon

X8SIA

COM2

SLOT6 PCI-E 2.0

SLOT5 PCI-E 2.0 X8

SLOT4 PCI-E2.0X8 IDT 89HI0524G2PS

SLOT3 PCI-E 2.0 (2.5GT/s) X1

	JPG1
JI2C1	SLOT2 PCI-E 2.0 (2.5GT/s) X4 (IN X8 SLOT)
JI2C2	JWOL:
	Wake on Lan

SLOT1 PCI 33MHz

USB5

JWOR
Wake on Ring	IPMB	USB6/7	USB8/9

PCH

+

USB4	CMOS CLEAR
JBT1

FAN3

+

T-SGPIO1 T-SGPIO2 FAN4 JL1 Chassis Intrusion

JL1:

JD1

JWF1

2-36