Danaher Motion Superior Electric
4.7.4 Timing Requirements
PULSE |
|
Max. Frequency | 20 kHz |
Max. Rise and |
|
Fall Times | 1 microsecond |
Min. Pulse |
|
Width | 25 microseconds |
Other Signals |
|
Response Time | 25 microseconds |
OPTO IN
PULSE DRIVE
OPTO IN
PULSE DRIVE
OPTO IN
PULSE DRIVE
OPTO IN
PULSE DRIVE
12 VDC, 16 mA PER SIGNAL
560 ohms
CONTROL SIGNAL
1/4 watt
CONTROL LOGIC COMMON
4.5 - 6.0 VDC, 16 mA PER SIGNAL
CONTROL SIGNAL
CONTROL LOGIC COMMON
4.5 - 6.0 VDC, 16 mA PER SIGNAL
TTL
CONTROL SIGNAL
7406
5V
SWITCH
OPTO 5V GND
Figure 4.2 Suggested Methods For Control Interface
4.8INDICATOR LIGHTS
"FAULT" LED, Red
Lights to indicate over current condition. This condition is caused by motor wiring errors or a ground fault.
Recovery from over current condition requires removing and then reapplying the power.
SS2000MD4 | 17 |
