Suunto D9 manual Wireless transmitter battery replacement, Battery kit, Required tools

8.5.2. Wireless transmitter battery replacement

NOTEIt is advisable to contact an authorized Suunto representative for transmitter battery replacement. It is imperative that the change is made in a proper manner to avoid any leakage of water into the transmitter.

CAUTION	Defects caused by improper battery installation are not covered
	by the warranty.

Battery kit

The transmitter battery kit includes a 3.0 V CR ½ AA lithium cell battery and a lubricated O-ring. When handling the battery, do not make contact with both of the poles at the same time. Do not touch the metal surfaces of the battery with your bare fingers.

Required tools

•A Phillips-head screwdriver

•Soft cloth for cleaning

Transmitter battery replacement

To change the transmitter battery, follow the procedure below:

1.Remove the transmitter from the regulator HP port.

2.Unscrew and remove the four Phillips screws on the back of the transmitter.

3.Pull off the transmitter cover.

4.Carefully remove the o-ring. Be careful not to damage the sealing surfaces.

96