Suunto D9 manual Dive numbering shown during dive planning, Dive logbook MEMlog

NOTE	The Planning mode is disabled in GAUGE mode and in Error
	mode (see Section 5.7. Error conditions). The planning mode
	calculates no-decompression times for MIX1 only. If additional
	mixes are enabled in the NITROX mode, they do not affect the
	calculations in MEMplan mode.

Higher Altitude and conservative Personal Adjustment settings will shorten the no- decompression time limits. These limits at different Altitude and Personal Adjustment setting selections are explained in Section 5.10.4. Diving at altitude and in Section 5.10.5. Personal adjustments

Dive numbering shown during dive planning

Dives belong to the same repetitive dive series if the instrument was still counting down the no-fly time at the beginning of the dive.

The surface interval must be at least 5 minutes for a dive to be considered a repetitive dive. Otherwise, it is considered a continuation of the same dive. The dive number will not change and the dive time will continue where it left off. (See also Section 7.1.2. Dive numbering ).

Dive logbook (MEMlog)

The Suunto D9 has a very sophisticated, high capacity Logbook and Profile Memory. The data is recorded in the profile memory based on the selected sample rate. Dives shorter than the recording interval are not registered (see Section 5.9.5. Setting the sample rate).

86