SVAT Electronics CV0104DVR instruction manual Troubleshooting, Problem Solution

SVAT ELECTRONICS

Now You Can See

7. TROUBLESHOOTING

Problem	Solution
No display on television	1.	Make sure all RCA and power cables are
		plugged in securely and in their proper places.
	2.	Make sure your television is on the correct
		channel (input mode).
DVR not recording	1.	Make sure recording is enabled in each
		camera's setting. Go to Menu>Camera
		Setup>Camera Setting and enable recording
		for each camera if it has been disabled.
	2.	Make sure recording is enabled and set to the
		correct recording setting in scheduled
		recording. Go to Menu>Record Setup>Record
		Mode. If a line (-) is over any hour of the day,
		that means recording is disabled for that time
		period. Press enter to enable recording for that
		hour. Also make sure you press REC when
		you return to Monitoring Mode, or your
		scheduled recording will not take effect.
	3.	Your disk may be full. By default the DVR
		should start rewriting over your earliest
		recorded files, but this option may be disabled.
		Go to Menu>Hard Drive Setup>Disk Full. Set it
		to OVERWRITE.
	4.	Make sure your DVR is in Monitoring Mode,
		and not at a menu screen or in Playback Mode.
No playback	1.	There is a delay while the DVR searches for
		your recorded files. Wait a few moments and
		your files should appear.
	2.	Make sure you are not in Recording Mode.
		Pressing PLAY during recording will have no
		effect. Press STOP first.
	3.	If you have just formatted your drive or your
		drive is otherwise empty, there will be no files
		to play back.
During playback, I can't switch	To switch between cameras during playback, you
to different camera views.	must have recorded your file in EACH mode.
	Change this setting using Menu>Record
	Setup>Record Type.

CV0104DVR 41