SVAT ELECTRONICS
Now You Can See
5.5 BUZZER SETUP
1.ALARM ALERT: Press ENTER to setup “ON” or “OFF”, whether to trigger the alarm when motion event has been detected (this setup is only active when the system is under record status and schedule record is setup to "M" (Mix).
2.VIDEO LOSS ALERT: Press ENTER to setup “ON” or “OFF”, whether to trigger the alarm when video loss has been detected (this setup is only active when the system is under record or live status).
3.HDD FULL ALERT: Press ENTER to setup “ON” or “OFF”, whether to trigger the alarm when hard disk is full (this setup is only active when the system is under record status).
4.BUZZER TIME: Press ENTER to setup the buzzer time to continuous (CONT), and press any button to release this setup.
CV0204DVR | 20 |
