SVAT Electronics CV0204DVR instruction manual Camera Setup, CH1 Title CAMERA1

SVAT ELECTRONICS

Now You Can See

5.3 CAMERA SETUP

1.Camera Enable - Select this option to change the camera view combination. For example, if you select (- - - -), all camera channels will be disabled, and a black screen will be displayed. If you select (1 2 3 4), all cameras channels will be enabled and displayed. If you select (- - - 4), only the camera 4 channel will be enabled and displayed. Use the ENTER button to change these combinations. Note: Disable the camera channels that you won't be using, or the VIDEO LOSS alarm will sound during startup and recording.

2.Camera Title - Select this option to change whether you want a custom title displayed for each camera, for no cameras, or for some cameras. Use the enter button to select the combination to your preference.

3.Camera Setting - Allows you to change specific settings for each camera. Please refer to the next section for more details.

4.CH(1-4) Title - Select a camera and use the up/down and ENTER buttons to change the title (maximum 8 characters). When you are finished, press MENU to confirm. Example: When highlighting “CH1 TITLE”, press ENTER to show the display below:

	V
CH1 TITLE	CAMERA1

“V” indicates the position of the cursor. Press the up and down buttons to move the cursor, and press ENTER to change the title (maximum 8 characters).

5.All channel titles are setup in the same way.

CV0204DVR 16