![](/images/new-backgrounds/1248642/24864257x1.webp)
To Format the HDD:
1.Select HDD FORMAT SETUP.
2.Select to enter the HDD Format Setup Menu.
3.Use the mouse wheel or directional keys to change from DISABLE to ENABLE.
4.Select to format your HDD.
5.You will be prompted to ensure that you really want to format the hard drive.
6.Select YES to format the hard drive, or NO to exit the Menu and not delete the stored footage. The selected button will looked as if it is pressed in.
7. | Press Menu or select the | to exit the HDD Management Menu or press the Menu button. |
8. | Press Menu or select the | to exit the Main Menu. |
| This will not erase any of your DVR settings. |
NETWORK SETUP
1.Access the Main Menu by pressing Menu or by using the Pop Up Menu Bar. Move the mouse to the bottom of the display screen to reveal the Pop Up Menu.
2.Select the Menu icon. ![](/images/new-backgrounds/1248642/24864257xi4.webp)
3.Select the NETWORK setup icon. ![](/images/new-backgrounds/1248642/24864257xi5.webp)
The network setup Menu is your gateway to viewing your footage online. This Menu holds the information you need about your DVR to set up
The Next Page has a quick description of the network setup menu items.
TERMS
IP Mode: Static vs. DHCP
DHCP: (Dynamic Host Configuration Protocol) address is the most common setup for home or office networks. This allows the DVR to automatically receive an IP address from the router. By default the IP MODE should be set to DHCP and this is acceptable in most situations.
static IP: is one that does not change. Static IP addresses are manually assigned by an administrator. Most home or office networks today do not use static IP addresses. If you are unsure of whether you need a static or dynamic IP address, please contact the person who setup your network or your internet service provider (ISP). A static IP address would be beneficial if your internal IP address changes often.
CV501 - 16CH | 32 |
|
|