BACKUP SETUP...continued

2.Choose the starting date and time of when to transfer the video footage. Highlight the value you wish to change and use the directional keys up and down or the mouse scroll wheel to adjust the value.

3.Choose the ending date and time of when to end the transfer of video footage. Highlight the value you wish to change and use the directional keys up and down or the mouse scroll wheel to adjust the value. If the Backup Capacity (in MB) is larger then the LEFT RATIO (In MB) the DVR will not allow you to backup the footage.

The DVR will take a few moments to complete the request since it will put the viewing software as well as video footage onto the USB flash drive. This backup player is required to view the backup footage as the files are exported using H.264 compression. The backup player install file is 1.10MB in size.

4.If you want to check to see how much space is taken up on your USB drive, you can re-enter the USB backup Menu and it will tell you at the bottom of the screen the USB capacity, USB used size and Left Ratio. This is also useful to see if the desired time range will fit onto the USB flash drive.

5.Press Menu or select the to exit the USB Backup Menu.

6.Press Menu or select the to exit the Main Menu and save your settings. The DVR may take a few moments to load the settings.

DVD/CD BACKUP

The following will explain all of the settings that are seen on screen.

Record Time: The start and end time is used to display the initial time and date when recording began and the final date and time when the recording finished (or the latest date and time when backup menu was accessed).

Backup Time: The start and end time is used to choose the time frame of the video clip to be burned onto a CD or DVD. All fields can be adjusted to best suit your backup time frame.

Backup Capacity: This displays the anticipated size of the backup file to be created.

If it reads ‘OUT OF RANGE’ then there was no footage available in your chosen backup time

If it reads off a number and a maximum number in brackets ex. 246Mb (2Gb Max), it is informing you of the file size you want to burn and how much space you have to burn it

Erase Disk: If the CD/DVD is rewritable, it will erase the disk before backing up the footage on it.

Close Disk: Allows you to choose if the CD/DVD you backup the footage to can have more footage/information added to it in the future. Some CD/DVD readers require that the disc is closed.

CV501 - 16CH

38

 

 

Page 35
Image 35
SVAT Electronics cv501-16ch manual Backup Setup, DVD/CD Backup