SVAT ELECTRONICS
6. NAME AND FUNCTION OF EACH PART now you can see
1. Imitation Sensor
2. Pinhole camera
3. Power Switch
When
4. SD Card Slot
5. Video Output Jack
To enable monitoring functions, connect one end of the RCA wire to the Video Out jack and the other end to your TV's video input jack. Make sure that your TV is said to VIDEO INPUT mode in order to view your DVR onscreen.
6. RCA Video Output
7. Full Stop/Overwrite
Select whether to overwrite the recorded SD card or to stop recording when the SD card is full. When you select “Overwrite”, the stored video will be overwritten starting with the oldest data first.
When you select “Full Stop”, the recording will automatically stop when the SD card is full. The LED indicator on the front panel will start flashing. Note that Full Stop/Overwrite can only be set before powering the unit on.
8. NTSC/PAL
If you are in North America, keep the switch set to NTSC.
The two most common video standards used are NTSC and PAL. NTSC is the video system commonly used in North America, Taiwan, Japan, Korea, and South America. PAL is the predominant video system used in China, Hong Kong, Europe, and India. Please select and switch to the system that best suits your location. Note that the PAL/NTSC can only be set before powering
the unit on.
9. Menu Button
10. Record & Stop Button
11. Play & Pause button
12. Reverse & Forward Buttons
13. Mounting Holes
14. Flush Wall Mount Holes
15. Battery Compartment
PI1000 | 5 |
