| 14 |
* NOTE: CAGE NUTS NOT NEEDED ON ALL POOLS - CHECK YOUR PACKING LIST
Before the top plates are installed it is necessary to attach the cage nuts* in their appropriate locations as shown in the figures at right.
Using a pliers, squeeze together the spring
sides of the cage |
|
|
nuts and insert them | TOP PLATE WITH CAGE NUT | CAGE NUT |
into the top |
| |
|
| |
plate from |
|
|
underneath. |
| PLIERS |
1/4” CAGE NUT |
| |
|
|
TOP PLATE
TOP PLATE
PLIERS
CAGE NUT
VERTICALS, TOP PLATES AND RAILS | 15 |
VERTICAL
BUTTRESS
If fencing or decking is to be installed, refer to the deck and fence instructions before installing verticals. The holes indented in the face of the verticals must be on top.
If your pool is equipped with feature tape, it is best to apply it to the verticals at this time.
No. 12 x 1/2”
Sheet Metal
Screw
Attention: If your pool has the 2 piece resin vertical, insert the flat piece into the vertical before installation, as shown.
18
