60

3 System upgrade

To remove the HSF assembly:

Important: Before removing a CPU from the mainboard, make sure to create a backup file of all important data.

1Observe the ESD precautions and pre-installation instructions described on page 33.

Warning! The heat sink becomes very hot when the system is on. NEVER touch the heat sink with any metal or with your hands.

2Disconnect the CPU fan cable from its mainboard connector.

3Disengage the retaining clip from the heat sink base (1).

4Release the clips from the tab on the heat sink base (2).

5Pull the heat sink fan assembly away from the CPU (3).

6 Place the heat sink fan assembly upside down on a flat surface.

Note: Wipe off the thermal grease from both the heat sink-fan assembly and CPU using an alcohol pad.

Page 70
Image 70
Acer G5350 Series manual To remove the HSF assembly