Acer G5350 Series manual

121

•Remove all add-in cares and see if the system boots. If successful, add the cards back in one at a time with a reboot between each addition.

•Make sure the memory modules comply with the system requirements.

•Make sure the memory modules have been populated according to the system requirements.

•Remove the memory modules and reseat them.

•Make sure the CPU(s) comply with the system requirements.

•Make sure the CPU(s) have been populated according to the system requirements.

If you are using an add-in video controller board, do the following:

1Verify that the video works using the onboard video controller.

2Verify that the video controller board is fully seated in the server board connector.

3Reboot the system for changes to take effect.

4If there are still no characters on the screen after you reboot the system and POST emits a beep code, write down the beep code you hear. This information is useful for your service representative.

5If you do not receive a beep code and characters do not appear, the video display monitor or video controller may have failed. Contact your service representative or authorized dealer for help.