150

Appendix C: SCSI RAID configuration

If you change the settings in the Hot Spare field, the following messages appear:

WARNING: Data on drive will be LOST!

Press DELETE if data loss OK or any other key to cancel.

6Press the Delete key to ignore.

7Press Esc, then select Save changes then exit this menu.

8To close the utility and reboot the server, follow the steps below:

(1)Press Esc, then select Exit the Configuration Utility. The Global properties saved. Hit any key to reboot message appears.

(2)Press any key to reboot the server.

RAID volume initialization

After you create the RAID volume and saved the changes, the disk controller will automatically initialize the RAID volume. LSI Logic 53C1030 supports background initialization, there’s no need to wait for the initialization to complete. Close the LSI Logic Configuration Utility after saving the changes.

Using the MegaRAID configuration utility

Turn on the system. When prompted, press Ctrl+M to enter the MegaRAID configuration utility. After a few seconds, the Management menu appears.

Loading the RAID card default setting

1In the Management menu, select Objects, then select Adapter. The current adapter settings appear.

2Select Factory Default, then Yes to load the default settings.

3Press Ctrl+Alt+Del to reboot the server.

Page 160
Image 160
Acer G5350 Series manual Using the MegaRAID configuration utility, RAID volume initialization