50 en Operating | AMC2 4W |
6.2Configuring the Ethernet Interface
To configure the AMC2 4W in a TCP/IP network environment use the tool AmcIpConfig provided in the following directory on the standalone or the remote server:
This tool can be copied and used on every computer.
NOTE!
i | The usage of the software application to configure the |
| |
| AMC2 4W via Ethernet interface is described in the online help |
| of the tool. |
6.3Resetting the AMC2 4W
When a problem occurs, first, try to fix the problem directly. If this does not solve the problem, resetting the AMC2 4W may help.
6.3.1Resetting the Software
1.Insert the provided screwdriver into the hole as shown in the figure below.
2.Push the reset button for at least three seconds.
3.The AMC2 4W will be reset and reboots. You are back in the download program.
Now it is possible to reconfigure the AMC2 4W from the begin- ning.
If the problem still arises, please, call your local service.
F.01U.024.965 V.4 2006.09 | Installation manual | Bosch Security Systems |