AMC2 4W | Operating en 51 |
Fig. 6.2 Restarting the AMC2 4W with the provided screw driver
6.3.2Resetting the Network Configurations
1.Reset the AMC2 4W as described above (in download pro- gram).
2.Open the upper case of the AMC2 4W as described in Section 5.3 Opening the AMC2 4W Case.
3.Set all six DIL switches of the
4.Press the tamper switch on the upper left side of the board The AMC2 4W will now have the following network configura- tion:
•
•
DHCP = 0
IP = 127.0.0.1
Bosch Security Systems | Installation manual | F.01U.024.965 V.4 2006.09 |
