69

Installing an expansion card

This section explains how to install an expansion card. The onboard expansion slots supports PCI (Peripheral Component Interconnect) and PCI-X cards.

To install an expansion card

1Observe the ESD precautions and pre-installation instructions described on page 33.

2Locate an empty expansion slot on the mainboard.

Note: The SCSI RAID controller shown below is for your reference only. To purchase a SCSI RAID controller, contact your local Acer representative or order directly from

http://www.acer.com/.

3Press the slot release latch outward (1).

4Pull out the slot cover (2). Store it for reassembly later.

5Remove the expansion card from its protective packaging.

6Align the card in the empty slot.

7Insert the card into the selected slot (3). Make sure that the card is properly seated.

Page 79
Image 79
Acer G5350 Series manual Installing an expansion card, To install an expansion card