
Replaceable Parts
Assembly and Disassembly Guidelines
| Assembly and Disassembly Guidelines |
| The guidelines in this section describe the removal and replacement of the major |
| assemblies in the Agilent E4418B and Agilent E4419B power meters. |
| Once an assembly has been replaced, refer to |
| to ensure that the correct performance tests and adjustments are carried out. |
|
|
WARNING | Refer to the safety symbols on the power meter and “Equipment |
| Operation”, on page |
| removed. Failure to comply with the safety precautions can result in |
| severe or fatal injury. |
|
|
|
|
WARNING | Before carrying out any assembly or disassembly of the power meter |
| ensure that you disconnect the power cord. Even with the power meter |
| switched off there are potentially dangerous voltages present on the |
| power supply assembly. |
|
|
| Removing the Power Meter Cover |
| Remove the optional battery if fitted before removing the cover. |
When replacing the power meter cover retighten the captive screws in the rear bezel using a 9 lb/in T15 screw driver.
Agilent E4418B/E4419B Service Guide |