Agilent Technologies e4418b, e4419b manual Introduction

Specifications

Introduction

Introduction

This chapter details the power meter’s specifications and supplemental characteristics.

Specifications describe the warranted performance and apply after a 30 minute warm-up. These specifications are valid over the power meter’s operating and environmental range unless otherwise stated and after performing a zero and calibration.

Supplemental characteristics, which are shown in italics, are intended to provide information useful in applying the power meter by giving typical, but non-warranted performance parameters. These characteristics are shown in italics or denoted as “typical”, “nominal” or “approximate”.

For information on measurement uncertainty calculations, refer to Agilent Application Note 64-1A, “Fundamentals of RF and Microwave Power Measurements”, Literature Number 5965-6630.

1-2 Agilent E4418B/E4419B Service Guide