Swisher ZT2350A manual Operation, Starting, Grass Height & Cutting Suggestions

Models: ZT2350A

1 40
Download 40 pages 59.63 Kb
Page 19
Image 19
Starting

OPERATION

Starting

¾Operator must be sitting in the seat. Control handles must be in the neutral (outward) position. Parking Brake on. PTO must be in the disengage position (pushed down).

¾Set choke (if needed), turn key and release as soon as engine starts. Adjust throttle to half and shut choke off.

¾Release the Parking Brake.

¾Be sure all people are clear of the area. Engage blades and set RPM to maximum.

Grass Height & Cutting Suggestions

¾Do not attempt to cut wet grass

NOTE:

If you have never used a Zero Turn mower before, refer to the Operation Controls section of this manual before attempting to operate one for the first time.

¾The average lawn should be cut to 2 ½” during the cool season and to over 3” during the hot months. For healthier and better looking lawns, mow often and after moderate growth.

¾As a rule , never cut more than 1/3 of the total grass blade length. Correct mowing height can reduce weeds and lawn disease.

¾For best performance, grass over 6 inches in height should be mowed twice. The first cut should be set relatively high and the second set to the desired height.

19

Page 19
Image 19
Swisher ZT2350A manual Operation, Starting, Grass Height & Cutting Suggestions