SERVICE & ADJUSTMENTS
Adjusting The Cutting Height
¾Push out on the Deck Lift Handle and raise or lower the deck to the desired position.
¾Position 1 is the lowest setting and Position 8 is the highest position
¾The cutting range is from approximately 1 ½” to approximately 5”
Deck Leveling
TOOLS REQUIRED:
92 - ½” Wrenches or ½” Socket with drive ratchet
¾Lower the cutting deck down to the lowest position (position 1)
¾Loosen the nuts on the top side of the deck hanger brackets (3 places) where the lift chains attach to.
¾With all three loose on top of the brackets the deck should now set on the ground resting on the roller wheels.
¾Tighten the nuts on the top of the lift brackets making sure that all three lift chains are pulled tight.
¾Lift deck using the deck lift handle to the desired position
21
