TROUBLESHOOTING Continued
PROBLEM |
| CAUSE |
| CORRECTION | |
|
|
|
|
| |
Poor cut - | 1. | Worn, bent or loose blade | 1. | Replace blade. Tighten blade bolt | |
2. | Mower deck not level | 2. | Level deck. See section in this manual | ||
uneven | 3. | Buildup of grass, leaves and trash under | 3. | Clean underside of mower deck | |
|
| deck. |
|
| |
| 4. | Bent deck | 4. | Replace deck | |
| 5. | Faulty Blade driver assembly | |||
| 5. | Replace blade driver assembly | |||
|
|
| |||
|
|
|
|
| |
Battery will | 1. | Bad battery | 1. | Replace battery | |
2. | Poor cable connections | 2. | Check/clean all connections. See section in | ||
not charge | 3. | Faulty solenoid |
| this manual | |
3. | Replace solenoid | ||||
|
|
| |||
|
|
|
|
| |
Loss of drive | 1. | Bypass linkages in the bypass position | 1. | Make sure that the bypass linkages are in | |
2. | Hydro belt worn, damaged, or broken |
| the drive or engaged position. Located at | ||
|
|
|
| ||
|
|
|
| the rear of the machine. Refer to decal on | |
| 3. | Idler spring loose or broken |
| the rear of the unit. | |
|
|
| 2. | Replace Hydro belt. | |
|
|
| 3. | Replace Idler spring | |
|
|
|
|
| |
|
|
|
|
|
36