Sybase DC35823-01-1500-04 Press Ctrl+A again. auditinit prompts with, Enter y yes, Press return

Adding auditing

Logical name			Physical name	Segment	name	Table
name		Size
6.	Audit_01'		/secret1/sybase_	dr/install/aud1.dat’		sysaudits_01	5
7.	Audit_02'		/secret1/sybase_	dr/install/aud2.dat'		sysaudits_02	5
8.	auditlog		/secret1/.../auditlog.dat		logsegment	syslogs	2

	7	When you are ready to execute the audit configuration, press Ctrl+A.
		auditinit returns you to the Sybase Server Configuration screen.
	8	Press Ctrl+A again. auditinit prompts with:
		Execute the Sybase Server Configuration now?
	9	Enter “y” (yes).
		auditinit executes the tasks to install auditing. When the installation
		completes successfully, the following messages are displayed:
		Running task: install auditing capabilities.
		....................Done
		Auditing capability installed.
		Task succeeded: install auditing capabilities.
		Configuration completed successfully.
		Press <return> to continue.
Enabling auditing	After auditing is installed, no auditing occurs until a System Security Officer
	enables auditing with sp_configure. For more information, see the System
	Administration Guide.
	v Deleting a device entry
	1	Select Delete a Device Entry from the Configure Auditing menu.
	2	Enter the number of the device to delete.
	3	Press return.

vChanging a device entry

1 Select Change a Device Entry from the Configure Auditing menu. 2 Enter the number of the device to change.

auditinit displays the Add/Change a New Device for Auditing menu with information on the device you selected:

ADD/CHANGE A NEW DEVICE FOR AUDITING

1.sybsecurity physical device name: /secret1/sybase_dr/install/audlog

2.Logical name of the device: aud.log

120 Adaptive Server Enterprise