PLAYBACK
NORMAL PLAYBACK
Make sure ...
The unit must be turned on.
1Insert a prerecorded tape
If the erase-prevention tab has been removed, the
unit will start playback automatically.
2To begin playback
Press [PLAYO].
3To stop playback
Press [STOP C].
NOTES:
Even in the DVD mode, you can start the VCR
playback if you press [BPLAY](of the TV/VCR
side).
VCR playback will stop and the mode will change
to the DVD mode by pressing [SELECT],
[BPLAY] (DVD side)or [AOPEN/CLOSE].
TV/VCR
TRACKING ADJUSTMENT
Tracking adjustment will be set automatically
(Digital Tracking function) when you start play-
back.
Noise lines (black and white streaks) may appear
on the playback picture when playing pre-recorded
tapes or tapes recorded on other VCR. If this
occurs, use [CH. K/L]until the streaks disappear.
You can reduce the noise lines by using
[CH. K/L]in the slow mode too. Tracking
adjustment in the slow mode will not be set auto-
matically.
To return to the Digital Auto Tracking function,
stop the tape once and start playback.
TV/VCR
PLAY B
STOP
- 25 - EN
STILL PICTURE
You can view a still picture on the TVscreen during
playback (the still mode). Press [PAUSEF]during
playback. Only tapes recorded in the SLPmode will
show the least amount of lines. Press [PLAYO]to
return to playback.
NOTES:
You can advance the picture one frame at a time by
pressing [PAUSE F]during the still mode.
If it is left in the pause mode for more than 5 min-
utes, the unit will automatically switch to the stop
mode.
TV/VCR
SLOW MOTION
Press [PAUSE F], then press [D]to start the play-
back in slow motion. The unit mutes the sound dur-
ing slow motion. Press [PLAYO]to return to nor-
mal playback.
NOTE:
If it is left in the slow mode for more than 5 min-
utes, the unit will automatically go into the stop
mode.
TV/VCR
VERTICAL HOLD CONTROL
In the pause/still mode only, when the picture begins
to vibrate vertically, stabilize the picture by using
[CH. K/L].
NOTE:
If there are video noise lines on the screen, refer to
TRACKING ADJUSTMENTon this page.
TV/VCR