Sylvania 6724DF , , , ,

- 32 - EN

NOTES:

•The display will not be turned on automatically at

the time the programmed recording begins. To

watch the currently recorded TVprogram or to

play a DVD disc, press [POWER] and [SELECT]

to choose the TV/VCR mode or the DVD mode.

•If the tape runs out before the end time, the unit

will switch to the stop mode immediately and the

tape will be ejected.

TIMER PROGRAM EXTENSION

To shift the time schedule of an automatic timer

recording.

1)Press [POWER].

2)Repeat step 1on page 31.

3)Press [RECORD] and select the desired program

using [K/L].

4)Press [RECORD] again.

Each additional push will shift forward the

begin/end time for recording by 10 minutes. When

the recording is already in progress, each additional

push will shift forward the end time only. If you

want to cancel while setting, press [PAUSEF]on

the remote control. The recording time returns to

the original time.

NOTE:

•When you shift forward the time schedule during

recording, the recording speed will automatically

be set to the SLPmode.

5)Press [ENTER] or [RETURN] to exit the setting

menu. Then press [SETUP] to return to original

mode.

TO CORRECT A PROGRAM

•While setting a program; press [s]to go back one

step and enter the correct numbers using [K/L].

•After setting a program;

1)Press [POWER].

2)Repeat steps 1to 2on page 31.

3)Press [B](or press [s]to go back one step)

until the part you want to correct begins flashing,

then make the changes using [K/L].

4)Press [POWER] to set automatic timer recording.

TO CANCEL AN AUTOMATIC TIMER

RECORDING

1)Press [POWER].

2)If recording is in progress, press

[C/ASTOP/EJECT] on the unit.

3)Repeat steps 1to 2on page 31 and select a pro-

gram you want to cancel.

4)Press [C.RESET].

5)Press [SETUP] to return to TV mode.

5Set beginning hour

Use [K/L]until the desired hour

appears.

(Example: “ 7, PM” for 7:30PM)

Then press [B].

6Set beginning minute

Use [K/L]until the desired

minute appears.

(Example: “30” for 7:30PM)

Then press [B].

7Set end hour

Use [K/L]until the desired hour

appears.

(Example: “8, PM” for 8:50PM)

Then press [B].

8Set end minute

Use [K/L]until the desired

minute appears.

(Example: “50” for 8:50PM)

Then press [B].

9Set the tape speed

Use [K/L]until the desired tape

speed appears. (Example: “SP”)

10 Finish setting the program

Press [ENTER] or [RETURN] to complete setting.

•To set another program, repeat steps 2to 10.

•Press [SETUP] to exit the menu.

11 Set the timer

Press [POWER] to set automatic timer recording.

The recording indicator lights up.

•You must turn off the unit to activate automatic

timer recording.

If power is not turned off and you continue watch-

ing TV, “TIMER REC STANDBY” starts flashing

on the TVscreen 2 minutes before the programmed

start time.

•If the erase-prevention tab is removed, the cassette

will be ejected when [POWER] is pressed to off.

– TIMER PROGRAMMING –

CH DATE BEGIN END

- - -/- - - - - -:- - -:- - - -

B61 7/04 MON 7:12PM-:- - - -

- - -/- - - - - -:- - -:- - - -

– TIMER PROGRAMMING –

CH DATE BEGIN END

- - -/- - - - - -:- - -:- - - -

B61 7/04 MON 7:30PM-:- - - -

- - -/- - - - - -:- - -:- - - -

– TIMER PROGRAMMING –

CH DATE BEGIN END

- - -/- - - - - -:- - -:- - - -

B61 7/04 MON 7:30PM8:30PM- -

- - -/- - - - - -:- - -:- - - -

– TIMER PROGRAMMING –

CH DATE BEGIN END

- - -/- - - - - -:- - -:- - - -

B61 7/04 MON 7:30PM8:50PM- -

- - -/- - - - - -:- - -:- - - -

– TIMER PROGRAMMING –

CH DATE BEGIN END

- - -/- - - - - -:- - -:- - - -

B61 7/04 MON 7:30PM8:50PMSP

- - -/- - - - - -:- - -:- - - -