- 38 - EN
SEARCH FUNCTION

TRACK SEARCH

There are three ways to begin playback on an Audio
CD at a specific track.
Using the Number buttons
1 Press the Number buttons to enter the
desired track number.
¡Playback will start at the selected track.
¡For single digit tracks (1-9), press a single number
(eg. track 3, press [3]).
¡To play track 26, press [+10], [2], [6].
Using [SEARCH MODE]
1 Press [SEARCHMODE].
¡The track search display appears.
2 Within 30 seconds,select the desired track
number using the Number buttons.
¡For single digits press [0] first, if the total track of
the disc is 10 tracks or more.
¡Playback will start at the selected track.
Using [

HH

/

GG

]
During playback, press [G]to move the next track.
Press it repeatedly to skip subsequent tracks. Press
[H]to go back to beginning of the current track.
Press it repeatedly to go to the previous tracks.
¡If [H/G]is pressed while the playback is
paused, the playback will be paused again after
skipping to the next track.
NOTE:
¡[H/G]are not operative when playback is
stopped.
CD

TITLE / CHAPTER SEARCH

1 Press [SEARCH MODE] once for the
Chapter search,twice for the Title search
during playback.
2 Enter the desired chapter/title number using
the Number buttons.
¡Playback will start at the selected chapter or title.
¡Press [CLEAR] to erase the incorrect input.
¡For single digits press [0]first, if the total number of
chapter or title of the disc is 10 or more.
DVD-V
_/2

TIME SEARCH

1 During playback,press [SEARCH MODE]
three times (CD:twice) to display the Time
Search on the TVscreen.
2 Within 30 seconds,enter a desired disc
time using the Number buttons.
¡Playback will start at the specified time.
¡Press [CLEAR] to erase the incorrect input.
¡When there is no need to enter a number, “0”
appears automatically. For example, “0 : 0 - : - -”
appears in the Time Search display if the total time
of the track or title is less than 10 minutes.
CD
DVD-V

MARKER SETUP SCREEN

Use markers to memorize your favorite places on a
disc.
1 Press [SEARCH MODE] four times
(CD:three times) during playback.
¡The display screen and Markers will appear on the
TV screen.
2 Using [s/B]select 1,2, 3, 4, 5, 6, 7, 8, 9,or
10 and ensure that “- - - - :- - :- -”appears
in the display.
3 When the disc reaches the desired point,
press [ENTER].
¡The Title or Track and elapsed playing time will
appear in the TVscreen.
4 To return to the Marker later, press
[SEARCH MODE] four times (CD:three
times) during playback and choose the
desired marker using [s/B],then press
[ENTER].
NOTES:
¡Operations which erase all Markers:
– Opening the disc tray
– Turning off the power
– Pressing [SELECT]
– Selecting “AC” at step 2and pressing [ENTER]
¡To clear a marker:
– Using [s/B]select a cursor on to the marker
number and press [CLEAR].
¡You can mark up to 10 points.
5 Press [SEARCH MODE] or [RETURN] to exit.
CD
DVD-V