- 29 - EN
RECORDING
Make sure ...
The unit must be turned on.
Insert a cassette tape with its erase-prevention tab in place. (If necessary, rewind or fast forward the tape to
the point at which you want to begin recording.)
NOTES:
This unit will ONLYrecord and view the same channel.
This unit cannot record the contents from the built-in DVD.
You can ONLYwatch the same TVprogram that is
being recorded.
1Select the channel to be recorded
Use the Number buttons or
[CH. K/L].
NOTE:
If the unit is connected to a cable box or satellite
box, the unit must be on CH3 or CH4, then the
channel to be recorded must be selected on the
cable box or satellite box.
2Select the tape speed
Press [SPEED] to select the
desired tape speed (SP/ SLP).
3Begin recording
Press [RECORD].
4Stop recording
Press [STOP C].
TV/VCR

NORMAL RECORDING

Press [PAUSE F]to temporarily
stop recording.
Press [PAUSE F]or [RECORD]
to resume recording.
NOTES:
After 5 minutes, the unit will
automatically switch to the recording mode to pre-
vent tape damage.
If Closed Caption mode is on, the On-Screen
Display will appear for 5 seconds, then disappear.
TV/VCR

SKIPPING UNWANTED

SCENES DURING RECORDING

SP
REC
SP
PAUSE
SP
CH 10